Public water system profile

City and County of Broomfield

Explore available public water records for City and County of Broomfield (PWSID CO0107155). Find annual reports, results listed in those reports, official sources, and clear notes about what the records can and cannot show. This page does not show conditions at a specific tap.

System Snapshot

Available system-level context

This snapshot shows the identity and context fields currently available for City and County of Broomfield (PWSID CO0107155). Read it with the source links and limitations below.

Last updated: Data reviewed:

System identity

PWSID
CO0107155
State
Colorado
Linked communities
Broomfield
County context
Not listed in current record
System type
Community water system
Source water
Surface water
Population served context
Not listed in current record
Service connections
Not listed in current record
Latest reviewed report
2025 report link found
Data updated
2026-08-15

A source-backed population-served value is not currently shown for this system. City population should not be used as a substitute for the public water system population.

Read these as system-level fields from reviewed public records. Confirm provider and address-specific questions with official utility, city, state, or EPA sources.

Report-Listed Rows

Report-listed rows summarized from the latest reviewed report

41 report-listed rows are summarized for City and County of Broomfield. A listed row is not the same thing as a current advisory or household tap result.

Report year
2025
Rows summarized
41
Source tables represented
6
Scope
Past reporting period
Report-row preview from the latest reviewed report for City and County of Broomfield
Substance and testing periodReported valueRange in reportLimit or standardSource tableReport-printed status
ArsenicTesting period: 2022 / every 9 yearsAverage: 0.41; Range: 0.41 ppbSource-printed resultNot listed in this summarized entryMCLG: 0; MCL: 10Detected Contaminants - Entry Point of the Distribution SystemPage 4Typical source, as printed: Erosion of natural deposits; discharge of drilling wasteMCL Violation: No, as printed for this sample period
Barium²Testing period: MonthlyAverage: 0.040; Range: 0.036 - 0.045 ppmSource-printed resultNot listed in this summarized entryMCLG: 2; MCL: 2Detected Contaminants - Entry Point of the Distribution SystemPage 4Typical source, as printed: Erosion of natural deposits; discharge of drilling wasteMCL Violation: No, as printed for this sample period
CadmiumTesting period: 2022 / every 9 yearsAverage: 0.11; Range: 0.11 ppbSource-printed resultNot listed in this summarized entryMCLG: 5; MCL: 5Detected Contaminants - Entry Point of the Distribution SystemPage 4Typical source, as printed: Corrosion of galvanized pipes; erosion of natural deposits; discharge from metal refineries; runoff from waste batteries and paintsMCL Violation: No, as printed for this sample period
ChromiumTesting period: 2022 / every 9 yearsAverage: .67; Range: .67 ppbSource-printed resultNot listed in this summarized entryMCLG: 100; MCL: 100Detected Contaminants - Entry Point of the Distribution SystemPage 4Typical source, as printed: Erosion of natural deposits; discharge from steel and pulp millsMCL Violation: No, as printed for this sample period
Fluoride²Testing period: MonthlyAverage: .62; Range: .53 - .75 ppmSource-printed resultNot listed in this summarized entryMCLG: 4; MCL: 4 (SMCL=2)Detected Contaminants - Entry Point of the Distribution SystemPage 4Typical source, as printed: Water additive which promotes strong teeth; erosion of natural deposits; discharge from fertilizer and aluminum factoriesMCL Violation: No, as printed for this sample period
Gross Alpha² (excluding Uranium)Testing period: 2024 / every 6-9 yearsAverage: 2.7; Range: 2.7 pCi/LSource-printed resultNot listed in this summarized entryMCLG: 0; MCL: 15Detected Contaminants - Entry Point of the Distribution SystemPage 4Typical source, as printed: Erosion of natural deposits; mine drainage; industrial activityMCL Violation: No, as printed for this sample period
Nickel² (monitoring required, but no MCL)Testing period: MonthlyAverage: 1.00; Range: BRL - 1.6 ppbSource-printed resultNot listed in this summarized entryNot listed in this summarized entryDetected Contaminants - Entry Point of the Distribution SystemPage 4Typical source, as printed: Industrial uses of nickel; alloying of steel and other metals; metal plating; batteries; pigments; ceramicsSource-printed guideline: MCLG: N/A; MCL: N/A
Nitrate, as Nitrogen²Testing period: MonthlyAverage: .14; Range: BRL - .18 ppmSource-printed resultNot listed in this summarized entryMCLG: 10; MCL: 10Detected Contaminants - Entry Point of the Distribution SystemPage 4Typical source, as printed: Runoff from fertilizer use; leaching from septic tanks, sewage; erosion of natural depositsMCL Violation: No, as printed for this sample period
Sodium² (monitoring required, but no MCL)Testing period: MonthlyAverage: 23.8; Range: 19.1 - 27.2 ppmSource-printed resultNot listed in this summarized entryNot listed in this summarized entryDetected Contaminants - Entry Point of the Distribution SystemPage 4Typical source, as printed: Naturally present in environment; additive to prevent premise plumbing corrosionSource-printed guideline: MCLG: N/A; MCL: N/A
Total Organic Carbon RatioTesting period: 2025; 12 samplesAverage RAA: 1.41; Range of Individual Ratio Samples: 1.20 - 1.51 RatioSource-printed resultNot listed in this summarized entryTT Requirement: Minimum Ratio = 1Detected Contaminants - At the Broomfield Water Treatment PlantPage 4Typical source, as printed: Naturally present in the environmentTT Violation: No, as printed for this sample period
Turbidity - Highest Single MeasurementTesting period: January / Every 4 hoursHighest Single Measurement: 0.16 NTU NTUSource-printed resultNot listed in this summarized entryTT Requirement: Maximum 1 NTU for any single measurementDetected Contaminants - At the Broomfield Water Treatment PlantPage 4Typical source, as printed: Soil runoffTT Violation: No, as printed for this sample period
Turbidity - Monthly PercentageTesting period: December / Every 4 hoursLowest % of Samples Meeting TT Requirement: 100 % %Source-printed resultNot listed in this summarized entryTT Requirement: At least 95% of samples must be less than 0.3 NTUDetected Contaminants - At the Broomfield Water Treatment PlantPage 4Typical source, as printed: Soil runoffTT Violation: No, as printed for this sample period
pHTesting period: DailyJan-Jun: 8.8 - 9.0; Jul-Dec: 8.8 - 9.0; # Excursions: None S.U.Source-printed resultNot listed in this summarized entryTT Requirement: Daily Average between 8.7 - 9.1Detected Contaminants - At the Broomfield Water Treatment PlantPage 4Typical source, as printed: Addition of treatment chemicalsTT Violation: No, as printed for this sample period
AlkalinityTesting period: DailyJan-Jun: 34 - 50; Jul-Dec: 37 - 45; # Excursions: None mg/LSource-printed resultNot listed in this summarized entryTT Requirement: Daily Average greater than 25 mg/LDetected Contaminants - At the Broomfield Water Treatment PlantPage 4Typical source, as printed: Addition of treatment chemicalsTT Violation: No, as printed for this sample period
TTHMTesting period: 2025; 32 samplesHighest LRAA: 30.0; Range of Compliance LRAA: 20.6 - 30.0; Range of Individual Samples: 14.8 - 31.8 ppbSource-printed resultNot listed in this summarized entryMCLG: 0; MCL: 80Detected Contaminants - In the Distribution SystemPage 4Typical source, as printed: Byproducts of chlorine disinfectionMCL Violation: No, as printed for this sample period
HAA5Testing period: 2025; 32 samplesHighest LRAA: 15.3; Range of Compliance LRAA: 11.5 - 15.3; Range of Individual Samples: 11.2 - 19.0 ppbSource-printed resultNot listed in this summarized entryMCLG: 0; MCL: 60Detected Contaminants - In the Distribution SystemPage 4Typical source, as printed: Byproducts of chlorine disinfectionMCL Violation: No, as printed for this sample period
Total Chlorine (as chloramine) - MRDLTesting period: 2025; 110 samples / monthAverage RAA: 2.5; Range: .2 - 3.4 ppmSource-printed resultNot listed in this summarized entryMRDLG: < 4; MRDL: Highest RAA Allowed 4.0Detected Contaminants - In the Distribution SystemPage 5Typical source, as printed: Water additive used to control microbesMCL Violation: No, as printed for this sample period
Total Chlorine (as chloramine) - Treatment TechniqueTesting period: 2025; 110 samples / monthLowest monthly percentage meeting TT: 100%; # Samples Below: None (0) ppmSource-printed resultNot listed in this summarized entryTT: At least 95% of samples each month must be at least 0.2 ppm.Detected Contaminants - In the Distribution SystemPage 5Typical source, as printed: Water additive used to control microbesTT Violation: No, as printed for this sample period
pHTesting period: QuarterlyJan-Jun: 8.5 - 9.0; Jul-Dec: 8.5 - 9.0; # Excursions: None S.U.Source-printed resultNot listed in this summarized entryTT Requirement: 8.5 - 9.1 for each siteDetected Contaminants - In the Distribution SystemPage 5Typical source, as printed: Addition of treatment chemicalsTT Violation: No, as printed for this sample period
AlkalinityTesting period: QuarterlyJan-Jun: 34 - 82; Jul-Dec: 39 - 67; # Excursions: None mg/LSource-printed resultNot listed in this summarized entryTT Requirement: Greater than 20 mg/L for each siteDetected Contaminants - In the Distribution SystemPage 5Typical source, as printed: Addition of treatment chemicalsTT Violation: No, as printed for this sample period
E. coliTesting period: 2025; 100 samples / monthResult: 1 Not listed in this summarized entrySource-printed resultNot listed in this summarized entryMCLG: 0; MCL: 1 initial sample positive, repeat sample negativeDetected Contaminants - In the Distribution SystemPage 5Typical source, as printed: Human and animal fecal wasteMCL Violation: No, as printed for this sample period
Lead - 1st HalfTesting period: April-May 2024 / Every 6 months; 106 samplesRange: BDL - 62.6; 90th Percentile: 2.70 ppbSource-printed resultNot listed in this summarized entryAction Level: 15Detected Contaminants - At Consumers' TapsPage 5Typical source, as printed: Corrosion of household plumbing systems; erosion of natural depositsAction Level Exceedance: No, as printed for this sample period
Copper - 1st HalfTesting period: April-May 2024 / Every 6 months; 106 samplesRange: .002 - .047; 90th Percentile: .028 ppmSource-printed resultNot listed in this summarized entryAction Level: 1.3Detected Contaminants - At Consumers' TapsPage 5Typical source, as printed: Corrosion of household plumbing systems; erosion of natural depositsAction Level Exceedance: No, as printed for this sample period
Lead - 2nd HalfTesting period: October 2024 / Every 6 months; 103 samplesRange: BDL - 72.9; 90th Percentile: 2.60 ppbSource-printed resultNot listed in this summarized entryAction Level: 15Detected Contaminants - At Consumers' TapsPage 5Typical source, as printed: Corrosion of household plumbing systems; erosion of natural depositsAction Level Exceedance: No, as printed for this sample period
Copper - 2nd HalfTesting period: October 2024 / Every 6 months; 103 samplesRange: .0015 - .1845; 90th Percentile: .028 ppmSource-printed resultNot listed in this summarized entryAction Level: 1.3Detected Contaminants - At Consumers' TapsPage 5Typical source, as printed: Corrosion of household plumbing systems; erosion of natural depositsAction Level Exceedance: No, as printed for this sample period
AluminumTesting period: 2025Range: .015 - .032 ppmSource-printed resultNot listed in this summarized entryNot listed in this summarized entrySecondary ContaminantsPage 5Source-printed guideline: Recommended Level: .05 - .2
ChlorideTesting period: 2025Range: 4.3 - 30 ppmSource-printed resultNot listed in this summarized entryNot listed in this summarized entrySecondary ContaminantsPage 5Source-printed guideline: Recommended Level: 250
CopperTesting period: 2025Range: .002 - .130 ppmSource-printed resultNot listed in this summarized entryNot listed in this summarized entrySecondary ContaminantsPage 5Source-printed guideline: Recommended Level: 1
FluorideTesting period: 2025Range: .2 - .7 ppmSource-printed resultNot listed in this summarized entryNot listed in this summarized entrySecondary ContaminantsPage 5Source-printed guideline: Recommended Level: 2
IronTesting period: 2025Range: ND - 22 ppbSource-printed resultNot listed in this summarized entryNot listed in this summarized entrySecondary ContaminantsPage 5Source-printed guideline: Recommended Level: 300
ManganeseTesting period: 2025Range: ND - 4.5 ppbSource-printed resultNot listed in this summarized entryNot listed in this summarized entrySecondary ContaminantsPage 5Source-printed guideline: Recommended Level: 50
SilverTesting period: 2025Range: ND ppmSource-printed resultNot listed in this summarized entryNot listed in this summarized entrySecondary ContaminantsPage 5Source-printed guideline: Recommended Level: .1
SulfateTesting period: 2025Range: 19 - 68 ppmSource-printed resultNot listed in this summarized entryNot listed in this summarized entrySecondary ContaminantsPage 5Source-printed guideline: Recommended Level: 250
TDSTesting period: 2025Range: 83 - 287 ppmSource-printed resultNot listed in this summarized entryNot listed in this summarized entrySecondary ContaminantsPage 5Source-printed guideline: Recommended Level: 500
ZincTesting period: 2025Range: ND - .011 ppmSource-printed resultNot listed in this summarized entryNot listed in this summarized entrySecondary ContaminantsPage 5Source-printed guideline: Recommended Level: 5
Hardness as CaCO3Testing period: 2025ppm Range: 25 - 130; grains/gal Range: 1.5 - 7.3 ppm / grains/galSource-printed resultNot listed in this summarized entryNot listed in this summarized entryUnregulated ContaminantsPage 5Source-printed guideline: ppm: <50 = “soft” >150 = “hard”; grains/gal: <3 = “soft” >8.8 = “hard”
CalciumTesting period: 2025Range: 7.7 - 36 ppmSource-printed resultNot listed in this summarized entryNot listed in this summarized entryUnregulated ContaminantsPage 5Source-printed guideline: Recommended Level: N/A
MagnesiumTesting period: 2025Range: 1.4 - 7.3 ppmSource-printed resultNot listed in this summarized entryNot listed in this summarized entryUnregulated ContaminantsPage 5Source-printed guideline: Recommended Level: N/A
NickelTesting period: 2025Range: ND - .002 ppmSource-printed resultNot listed in this summarized entryNot listed in this summarized entryUnregulated ContaminantsPage 5Source-printed guideline: Recommended Level: .1
PotassiumTesting period: 2025Range: .67 - 2.4 ppmSource-printed resultNot listed in this summarized entryNot listed in this summarized entryUnregulated ContaminantsPage 5Source-printed guideline: Recommended Level: N/A
SodiumTesting period: 2025Range: 15 - 22 ppmSource-printed resultNot listed in this summarized entryNot listed in this summarized entryUnregulated ContaminantsPage 5Source-printed guideline: Recommended Level: N/A

Report row

Arsenic

Range in report
Not listed in this summarized entry
Source-printed result
Average: 0.41; Range: 0.41 ppb
Testing period
2022 / every 9 years
Sites above action level
Not applicable to this summarized entry
Limit or standard
MCLG: 0; MCL: 10
Report-printed status
MCL Violation: No, as printed for this sample period

Source · Page 4

Detected Contaminants - Entry Point of the Distribution System

Typical source, as printed: Erosion of natural deposits; discharge of drilling waste

Report row

Barium²

Range in report
Not listed in this summarized entry
Source-printed result
Average: 0.040; Range: 0.036 - 0.045 ppm
Testing period
Monthly
Sites above action level
Not applicable to this summarized entry
Limit or standard
MCLG: 2; MCL: 2
Report-printed status
MCL Violation: No, as printed for this sample period

Source · Page 4

Detected Contaminants - Entry Point of the Distribution System

Typical source, as printed: Erosion of natural deposits; discharge of drilling waste

Report row

Cadmium

Range in report
Not listed in this summarized entry
Source-printed result
Average: 0.11; Range: 0.11 ppb
Testing period
2022 / every 9 years
Sites above action level
Not applicable to this summarized entry
Limit or standard
MCLG: 5; MCL: 5
Report-printed status
MCL Violation: No, as printed for this sample period

Source · Page 4

Detected Contaminants - Entry Point of the Distribution System

Typical source, as printed: Corrosion of galvanized pipes; erosion of natural deposits; discharge from metal refineries; runoff from waste batteries and paints

Report row

Chromium

Range in report
Not listed in this summarized entry
Source-printed result
Average: .67; Range: .67 ppb
Testing period
2022 / every 9 years
Sites above action level
Not applicable to this summarized entry
Limit or standard
MCLG: 100; MCL: 100
Report-printed status
MCL Violation: No, as printed for this sample period

Source · Page 4

Detected Contaminants - Entry Point of the Distribution System

Typical source, as printed: Erosion of natural deposits; discharge from steel and pulp mills

Report row

Fluoride²

Range in report
Not listed in this summarized entry
Source-printed result
Average: .62; Range: .53 - .75 ppm
Testing period
Monthly
Sites above action level
Not applicable to this summarized entry
Limit or standard
MCLG: 4; MCL: 4 (SMCL=2)
Report-printed status
MCL Violation: No, as printed for this sample period

Source · Page 4

Detected Contaminants - Entry Point of the Distribution System

Typical source, as printed: Water additive which promotes strong teeth; erosion of natural deposits; discharge from fertilizer and aluminum factories

Report row

Gross Alpha² (excluding Uranium)

Range in report
Not listed in this summarized entry
Source-printed result
Average: 2.7; Range: 2.7 pCi/L
Testing period
2024 / every 6-9 years
Sites above action level
Not applicable to this summarized entry
Limit or standard
MCLG: 0; MCL: 15
Report-printed status
MCL Violation: No, as printed for this sample period

Source · Page 4

Detected Contaminants - Entry Point of the Distribution System

Typical source, as printed: Erosion of natural deposits; mine drainage; industrial activity

Report row

Nickel² (monitoring required, but no MCL)

Range in report
Not listed in this summarized entry
Source-printed result
Average: 1.00; Range: BRL - 1.6 ppb
Testing period
Monthly
Sites above action level
Not applicable to this summarized entry
Limit or standard
Not listed in this summarized entry
Report-printed status
Source-printed guideline: MCLG: N/A; MCL: N/A

Source · Page 4

Detected Contaminants - Entry Point of the Distribution System

Typical source, as printed: Industrial uses of nickel; alloying of steel and other metals; metal plating; batteries; pigments; ceramics

Report row

Nitrate, as Nitrogen²

Range in report
Not listed in this summarized entry
Source-printed result
Average: .14; Range: BRL - .18 ppm
Testing period
Monthly
Sites above action level
Not applicable to this summarized entry
Limit or standard
MCLG: 10; MCL: 10
Report-printed status
MCL Violation: No, as printed for this sample period

Source · Page 4

Detected Contaminants - Entry Point of the Distribution System

Typical source, as printed: Runoff from fertilizer use; leaching from septic tanks, sewage; erosion of natural deposits

Report row

Sodium² (monitoring required, but no MCL)

Range in report
Not listed in this summarized entry
Source-printed result
Average: 23.8; Range: 19.1 - 27.2 ppm
Testing period
Monthly
Sites above action level
Not applicable to this summarized entry
Limit or standard
Not listed in this summarized entry
Report-printed status
Source-printed guideline: MCLG: N/A; MCL: N/A

Source · Page 4

Detected Contaminants - Entry Point of the Distribution System

Typical source, as printed: Naturally present in environment; additive to prevent premise plumbing corrosion

Report row

Total Organic Carbon Ratio

Range in report
Not listed in this summarized entry
Source-printed result
Average RAA: 1.41; Range of Individual Ratio Samples: 1.20 - 1.51 Ratio
Testing period
2025; 12 samples
Sites above action level
Not applicable to this summarized entry
Limit or standard
TT Requirement: Minimum Ratio = 1
Report-printed status
TT Violation: No, as printed for this sample period

Source · Page 4

Detected Contaminants - At the Broomfield Water Treatment Plant

Typical source, as printed: Naturally present in the environment

Report row

Turbidity - Highest Single Measurement

Range in report
Not listed in this summarized entry
Source-printed result
Highest Single Measurement: 0.16 NTU NTU
Testing period
January / Every 4 hours
Sites above action level
Not applicable to this summarized entry
Limit or standard
TT Requirement: Maximum 1 NTU for any single measurement
Report-printed status
TT Violation: No, as printed for this sample period

Source · Page 4

Detected Contaminants - At the Broomfield Water Treatment Plant

Typical source, as printed: Soil runoff

Report row

Turbidity - Monthly Percentage

Range in report
Not listed in this summarized entry
Source-printed result
Lowest % of Samples Meeting TT Requirement: 100 % %
Testing period
December / Every 4 hours
Sites above action level
Not applicable to this summarized entry
Limit or standard
TT Requirement: At least 95% of samples must be less than 0.3 NTU
Report-printed status
TT Violation: No, as printed for this sample period

Source · Page 4

Detected Contaminants - At the Broomfield Water Treatment Plant

Typical source, as printed: Soil runoff

Report row

pH

Range in report
Not listed in this summarized entry
Source-printed result
Jan-Jun: 8.8 - 9.0; Jul-Dec: 8.8 - 9.0; # Excursions: None S.U.
Testing period
Daily
Sites above action level
Not applicable to this summarized entry
Limit or standard
TT Requirement: Daily Average between 8.7 - 9.1
Report-printed status
TT Violation: No, as printed for this sample period

Source · Page 4

Detected Contaminants - At the Broomfield Water Treatment Plant

Typical source, as printed: Addition of treatment chemicals

Report row

Alkalinity

Range in report
Not listed in this summarized entry
Source-printed result
Jan-Jun: 34 - 50; Jul-Dec: 37 - 45; # Excursions: None mg/L
Testing period
Daily
Sites above action level
Not applicable to this summarized entry
Limit or standard
TT Requirement: Daily Average greater than 25 mg/L
Report-printed status
TT Violation: No, as printed for this sample period

Source · Page 4

Detected Contaminants - At the Broomfield Water Treatment Plant

Typical source, as printed: Addition of treatment chemicals

Report row

TTHM

Range in report
Not listed in this summarized entry
Source-printed result
Highest LRAA: 30.0; Range of Compliance LRAA: 20.6 - 30.0; Range of Individual Samples: 14.8 - 31.8 ppb
Testing period
2025; 32 samples
Sites above action level
Not applicable to this summarized entry
Limit or standard
MCLG: 0; MCL: 80
Report-printed status
MCL Violation: No, as printed for this sample period

Source · Page 4

Detected Contaminants - In the Distribution System

Typical source, as printed: Byproducts of chlorine disinfection

Report row

HAA5

Range in report
Not listed in this summarized entry
Source-printed result
Highest LRAA: 15.3; Range of Compliance LRAA: 11.5 - 15.3; Range of Individual Samples: 11.2 - 19.0 ppb
Testing period
2025; 32 samples
Sites above action level
Not applicable to this summarized entry
Limit or standard
MCLG: 0; MCL: 60
Report-printed status
MCL Violation: No, as printed for this sample period

Source · Page 4

Detected Contaminants - In the Distribution System

Typical source, as printed: Byproducts of chlorine disinfection

Report row

Total Chlorine (as chloramine) - MRDL

Range in report
Not listed in this summarized entry
Source-printed result
Average RAA: 2.5; Range: .2 - 3.4 ppm
Testing period
2025; 110 samples / month
Sites above action level
Not applicable to this summarized entry
Limit or standard
MRDLG: < 4; MRDL: Highest RAA Allowed 4.0
Report-printed status
MCL Violation: No, as printed for this sample period

Source · Page 5

Detected Contaminants - In the Distribution System

Typical source, as printed: Water additive used to control microbes

Report row

Total Chlorine (as chloramine) - Treatment Technique

Range in report
Not listed in this summarized entry
Source-printed result
Lowest monthly percentage meeting TT: 100%; # Samples Below: None (0) ppm
Testing period
2025; 110 samples / month
Sites above action level
Not applicable to this summarized entry
Limit or standard
TT: At least 95% of samples each month must be at least 0.2 ppm.
Report-printed status
TT Violation: No, as printed for this sample period

Source · Page 5

Detected Contaminants - In the Distribution System

Typical source, as printed: Water additive used to control microbes

Report row

pH

Range in report
Not listed in this summarized entry
Source-printed result
Jan-Jun: 8.5 - 9.0; Jul-Dec: 8.5 - 9.0; # Excursions: None S.U.
Testing period
Quarterly
Sites above action level
Not applicable to this summarized entry
Limit or standard
TT Requirement: 8.5 - 9.1 for each site
Report-printed status
TT Violation: No, as printed for this sample period

Source · Page 5

Detected Contaminants - In the Distribution System

Typical source, as printed: Addition of treatment chemicals

Report row

Alkalinity

Range in report
Not listed in this summarized entry
Source-printed result
Jan-Jun: 34 - 82; Jul-Dec: 39 - 67; # Excursions: None mg/L
Testing period
Quarterly
Sites above action level
Not applicable to this summarized entry
Limit or standard
TT Requirement: Greater than 20 mg/L for each site
Report-printed status
TT Violation: No, as printed for this sample period

Source · Page 5

Detected Contaminants - In the Distribution System

Typical source, as printed: Addition of treatment chemicals

Report row

E. coli

Range in report
Not listed in this summarized entry
Source-printed result
Result: 1 Not listed in this summarized entry
Testing period
2025; 100 samples / month
Sites above action level
Not applicable to this summarized entry
Limit or standard
MCLG: 0; MCL: 1 initial sample positive, repeat sample negative
Report-printed status
MCL Violation: No, as printed for this sample period

Source · Page 5

Detected Contaminants - In the Distribution System

Typical source, as printed: Human and animal fecal waste

Report row

Lead - 1st Half

Range in report
Not listed in this summarized entry
Source-printed result
Range: BDL - 62.6; 90th Percentile: 2.70 ppb
Testing period
April-May 2024 / Every 6 months; 106 samples
Sites above action level
Not applicable to this summarized entry
Limit or standard
Action Level: 15
Report-printed status
Action Level Exceedance: No, as printed for this sample period

Source · Page 5

Detected Contaminants - At Consumers' Taps

Typical source, as printed: Corrosion of household plumbing systems; erosion of natural deposits

Report row

Copper - 1st Half

Range in report
Not listed in this summarized entry
Source-printed result
Range: .002 - .047; 90th Percentile: .028 ppm
Testing period
April-May 2024 / Every 6 months; 106 samples
Sites above action level
Not applicable to this summarized entry
Limit or standard
Action Level: 1.3
Report-printed status
Action Level Exceedance: No, as printed for this sample period

Source · Page 5

Detected Contaminants - At Consumers' Taps

Typical source, as printed: Corrosion of household plumbing systems; erosion of natural deposits

Report row

Lead - 2nd Half

Range in report
Not listed in this summarized entry
Source-printed result
Range: BDL - 72.9; 90th Percentile: 2.60 ppb
Testing period
October 2024 / Every 6 months; 103 samples
Sites above action level
Not applicable to this summarized entry
Limit or standard
Action Level: 15
Report-printed status
Action Level Exceedance: No, as printed for this sample period

Source · Page 5

Detected Contaminants - At Consumers' Taps

Typical source, as printed: Corrosion of household plumbing systems; erosion of natural deposits

Report row

Copper - 2nd Half

Range in report
Not listed in this summarized entry
Source-printed result
Range: .0015 - .1845; 90th Percentile: .028 ppm
Testing period
October 2024 / Every 6 months; 103 samples
Sites above action level
Not applicable to this summarized entry
Limit or standard
Action Level: 1.3
Report-printed status
Action Level Exceedance: No, as printed for this sample period

Source · Page 5

Detected Contaminants - At Consumers' Taps

Typical source, as printed: Corrosion of household plumbing systems; erosion of natural deposits

Report row

Aluminum

Range in report
Not listed in this summarized entry
Source-printed result
Range: .015 - .032 ppm
Testing period
2025
Sites above action level
Not applicable to this summarized entry
Limit or standard
Not listed in this summarized entry
Report-printed status
Source-printed guideline: Recommended Level: .05 - .2

Source · Page 5

Secondary Contaminants

Report row

Chloride

Range in report
Not listed in this summarized entry
Source-printed result
Range: 4.3 - 30 ppm
Testing period
2025
Sites above action level
Not applicable to this summarized entry
Limit or standard
Not listed in this summarized entry
Report-printed status
Source-printed guideline: Recommended Level: 250

Source · Page 5

Secondary Contaminants

Report row

Copper

Range in report
Not listed in this summarized entry
Source-printed result
Range: .002 - .130 ppm
Testing period
2025
Sites above action level
Not applicable to this summarized entry
Limit or standard
Not listed in this summarized entry
Report-printed status
Source-printed guideline: Recommended Level: 1

Source · Page 5

Secondary Contaminants

Report row

Fluoride

Range in report
Not listed in this summarized entry
Source-printed result
Range: .2 - .7 ppm
Testing period
2025
Sites above action level
Not applicable to this summarized entry
Limit or standard
Not listed in this summarized entry
Report-printed status
Source-printed guideline: Recommended Level: 2

Source · Page 5

Secondary Contaminants

Report row

Iron

Range in report
Not listed in this summarized entry
Source-printed result
Range: ND - 22 ppb
Testing period
2025
Sites above action level
Not applicable to this summarized entry
Limit or standard
Not listed in this summarized entry
Report-printed status
Source-printed guideline: Recommended Level: 300

Source · Page 5

Secondary Contaminants

Report row

Manganese

Range in report
Not listed in this summarized entry
Source-printed result
Range: ND - 4.5 ppb
Testing period
2025
Sites above action level
Not applicable to this summarized entry
Limit or standard
Not listed in this summarized entry
Report-printed status
Source-printed guideline: Recommended Level: 50

Source · Page 5

Secondary Contaminants

Report row

Silver

Range in report
Not listed in this summarized entry
Source-printed result
Range: ND ppm
Testing period
2025
Sites above action level
Not applicable to this summarized entry
Limit or standard
Not listed in this summarized entry
Report-printed status
Source-printed guideline: Recommended Level: .1

Source · Page 5

Secondary Contaminants

Report row

Sulfate

Range in report
Not listed in this summarized entry
Source-printed result
Range: 19 - 68 ppm
Testing period
2025
Sites above action level
Not applicable to this summarized entry
Limit or standard
Not listed in this summarized entry
Report-printed status
Source-printed guideline: Recommended Level: 250

Source · Page 5

Secondary Contaminants

Report row

TDS

Range in report
Not listed in this summarized entry
Source-printed result
Range: 83 - 287 ppm
Testing period
2025
Sites above action level
Not applicable to this summarized entry
Limit or standard
Not listed in this summarized entry
Report-printed status
Source-printed guideline: Recommended Level: 500

Source · Page 5

Secondary Contaminants

Report row

Zinc

Range in report
Not listed in this summarized entry
Source-printed result
Range: ND - .011 ppm
Testing period
2025
Sites above action level
Not applicable to this summarized entry
Limit or standard
Not listed in this summarized entry
Report-printed status
Source-printed guideline: Recommended Level: 5

Source · Page 5

Secondary Contaminants

Report row

Hardness as CaCO3

Range in report
Not listed in this summarized entry
Source-printed result
ppm Range: 25 - 130; grains/gal Range: 1.5 - 7.3 ppm / grains/gal
Testing period
2025
Sites above action level
Not applicable to this summarized entry
Limit or standard
Not listed in this summarized entry
Report-printed status
Source-printed guideline: ppm: <50 = “soft” >150 = “hard”; grains/gal: <3 = “soft” >8.8 = “hard”

Source · Page 5

Unregulated Contaminants

Report row

Calcium

Range in report
Not listed in this summarized entry
Source-printed result
Range: 7.7 - 36 ppm
Testing period
2025
Sites above action level
Not applicable to this summarized entry
Limit or standard
Not listed in this summarized entry
Report-printed status
Source-printed guideline: Recommended Level: N/A

Source · Page 5

Unregulated Contaminants

Report row

Magnesium

Range in report
Not listed in this summarized entry
Source-printed result
Range: 1.4 - 7.3 ppm
Testing period
2025
Sites above action level
Not applicable to this summarized entry
Limit or standard
Not listed in this summarized entry
Report-printed status
Source-printed guideline: Recommended Level: N/A

Source · Page 5

Unregulated Contaminants

Report row

Nickel

Range in report
Not listed in this summarized entry
Source-printed result
Range: ND - .002 ppm
Testing period
2025
Sites above action level
Not applicable to this summarized entry
Limit or standard
Not listed in this summarized entry
Report-printed status
Source-printed guideline: Recommended Level: .1

Source · Page 5

Unregulated Contaminants

Report row

Potassium

Range in report
Not listed in this summarized entry
Source-printed result
Range: .67 - 2.4 ppm
Testing period
2025
Sites above action level
Not applicable to this summarized entry
Limit or standard
Not listed in this summarized entry
Report-printed status
Source-printed guideline: Recommended Level: N/A

Source · Page 5

Unregulated Contaminants

Report row

Sodium

Range in report
Not listed in this summarized entry
Source-printed result
Range: 15 - 22 ppm
Testing period
2025
Sites above action level
Not applicable to this summarized entry
Limit or standard
Not listed in this summarized entry
Report-printed status
Source-printed guideline: Recommended Level: N/A

Source · Page 5

Unregulated Contaminants

Source report notes

Source: City and County of Broomfield 2025 Annual Drinking Water Quality Report. Retrieved 2026-08-15.

  • Applies to: Arsenic, Barium², Cadmium, Chromium, Fluoride², Gross Alpha² (excluding Uranium), Nickel² (monitoring required, but no MCL), Nitrate, as Nitrogen², Sodium² (monitoring required, but no MCL), Total Organic Carbon Ratio, Turbidity - Highest Single Measurement, Turbidity - Monthly Percentage, pH, Alkalinity, TTHM, HAA5, Total Chlorine (as chloramine) - MRDL, Total Chlorine (as chloramine) - Treatment Technique, E. coli, Lead - 1st Half, Copper - 1st Half, Lead - 2nd Half, Copper - 2nd Half, Aluminum, Chloride, Copper, Fluoride, Iron, Manganese, Silver, Sulfate, TDS, Zinc, Hardness as CaCO3, Calcium, Magnesium, Nickel, Potassium, Sodium

    The result string preserves the source's labels, values, ranges, and any printed inconsistency.

Review the linked source report for definitions, footnotes, and official wording.

Violation Records

Violation records shown on this page

This section shows 0 system-scoped violation detail records currently included for City and County of Broomfield. Annual reports and current notices can use different timing and terminology.

No system-scoped violation detail records are included in the available reviewed records for this system. This is not an official compliance finding. Check the official utility, state, or EPA source for current compliance and notice information.

Important limitation

Profile summary note

This page summarizes public records reviewed by this site. It does not replace official notices, utility updates, or state drinking water information.

System profile limitations

  • This record is based on official City and County of Broomfield report-page and report-document sources reviewed on August 15, 2026.
  • Address-level service can vary. Confirm the serving provider with a bill, account portal, utility, city, or state source.
  • Population served is omitted until a current source-backed public-water-system inventory value is listed.
  • All 41 printed constituent/result rows remain attached to the report record. The existing system report preview remains empty and does not infer representative current conditions.
  • This page shows summarized entries from the available report. It does not include a complete contaminant or violation table.
  • Missing fields are not findings. They mean the field is not shown on this page from the records currently available.
  • This page summarizes available public records. It may not include every update, notice, or urgent official advisory.

Latest Reviewed Report

Latest reviewed report found by this site

The 2025 report found for City and County of Broomfield summarizes a past reporting period. It is not a live alert page.

Utility reportReport data updated:

2025 Annual Drinking Water Quality Report

Open 2025 water quality report (opens in a new tab)

The 2025 report link is available for City and County of Broomfield. Use the linked source report for the full table, definitions, footnotes, and official context. This page includes summarized entries from the available report. They are not a complete copy of the report table.

Report year
2025
Summarized entries shown
41
Source name
City and County of Broomfield 2025 Annual Drinking Water Quality Report
Source retrieved
2026-08-15
Last reviewed
2026-08-15

Use the linked source report for the full table, definitions, footnotes, and official context.

Data coverage

This page summarizes selected public records for this public water system. It may not include every report, update, current notice, or address-level service detail.

Latest reviewed report
2025 report link found
Report-listed rows
41 summarized report entries shown
Detailed violation records
No detailed system-scoped records displayed
Population served
Not listed in current record
Service connections
Not listed in current record
City context
Broomfield
County context
Not listed in current record

Local Context

City and state context for this system

City and County of Broomfield is linked here to Broomfield for navigation. That relationship does not confirm the provider for a specific address; use a bill, utility portal, or official lookup source.

Linked local context

Linked communities
Broomfield
County context
Not listed in current record
State context
Colorado

Corrections

Suggest a correction or newer source

If you have a newer official report, utility source, or correction, send the source link for review. This helps keep profile summaries tied to public records.

Suggest an update

Evidence

Official sources and report links

Use official federal, state, utility, or report sources before treating a page as final.

Opens in a new tab